検索
| Product name | Short-wavelength Infrared LED Light Equipment | |||||||
|---|---|---|---|---|---|---|---|---|
| Model (*1) |
UFLS-501-12IR-xxxx-UT-EI-FB * “xxxx” contains one of the peak wavelength values below. |
|||||||
| Peak wavelength (nm) (*2) | 1060 | 1100 | 1150 | 1200 | 1300 | 1450 | 1550 | |
| Radiant flux (W) (*3) | 6.2 | 4.2 | 3.2 | 1.3 | 0.9 | 0.8 | 0.5 | |
| LED life (*4) | 23,000 h | |||||||
| Luminance system | Constant-current luminance | |||||||
| Dimming system | Variable current control | |||||||
| Compatible light guide (*5) |
Standard: Made by U-TECHNOLOGY, bundle diameter φ8-12 * Be sure to use a heat-resistant light guide. |
|||||||
| Risk group |
1060/1100 nm: Risk group 2, 1150 nm: Risk group 1, 1200-1550 nm: Exempt group |
|||||||
|
Dimming Value in [ ] is during optical feedback. |
Manual: Digital setting via light control knob 00: OFF, 10 [20] – FF in 240 [224] steps |
|||||||
|
External serial: Setting via RS232C communication 00: OFF, 10 [20] – FF in 240 [224] steps External digital: Setting via 8-Bit parallel signal External analog: 0-5 V (valid range: 0.32 [0.64] – 5 V) 0.15 V or below: OFF Ethernet (8-Bit) Ethernet (10-Bit) |
||||||||
| ON/OFF control |
Optocoupler insulation, built-in CRD, response 1 msec or less (During maximum dimming. In case of repetitive signals, response up to 20 kHz) * When optical feedback is enabled, the response time may become slower. When turning ON repeatedly, set each luminance time to 20 msec or more. |
|||||||
| Error detection |
If fan stoppage, LED overheating, LED breakage, or input/LED over-current is detected, the alarm indicator turns ON and the LED turns OFF. |
|||||||
| Input protection | By fuse | |||||||
| Input voltage | Rating: 24 VDC (±5%) | |||||||
| Power consumption | 65 W Max | |||||||
| Usage environment |
Temperature: 5-40°C Humidity: 20-85%RH (no condensation) |
|||||||
| Storage environment |
Temperature: -20-60°C Humidity: 20-85%RH (no condensation) |
|||||||
| Cooling system | Forced cooling (air inlet: front panel, air outlet: rear panel) | |||||||
| Outside dimensions | 102 × 143 × 92 mm (excluding protrusions) | |||||||
| Enclosure material | Steel plate, acrylic coating | |||||||
| Weight | Approx. 1.3 kg | |||||||
*1 Model notation example: UFLS-501-12IR-1060-UT-EI-FB
UFLS-501 : Main unit
-12 : Light collection optical system
IR : Short-wavelength infrared LED
-1060 : Nominal peak wavelength (nm)
-UT : Light guide adapter
-EI : Ethernet compatible
-FB : Optical feedback compatible
*2 Typical values at maximum dimming and LED temperature of 25°C. These are not guaranteed values.
*3 Typical values are shown for all radiant fluxes. These are not guaranteed values.
*4 The expected life when used at maximum dimming and an ambient temperature of 40°C. This is not a guaranteed value. Future changes are possible.
*5 A third-party light guide can be connected using a separately sold optional part.